Sony KV-32FS320 - Manual (Page 23)

16
Connections
Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏ To activate your remote, press (FUNCTION button) to operate your VCR or
(FUNCTION button) to operate your satellite receiver.
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
1 3 4
VIDEO
L L
(MONO)
R
S VIDEO
Y
P B
P R
5
VIDEO
LINE
OUT
AUDIO L AUDIO R
LINE
IN
L
R
L
R
Y
B
P
P
R
VIDEO 1 VIDEO 2 VIDEO 1 VIDEO 2
AUDIO OUT
(VAR/FIX)
L
R
(MONO)
Satellite receiver
1
2
Satellite antenna
cable
VCR
4
5
6
3b 3a
Splitter
From
cable or
antenna Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
For Viewing
For Recording
For Playback
For Viewing
Optional