Sony VGN-AX580G - Manual (Page 2)

VGN-AX Series Hard Disk Drive
Replacement Instructions
P/N 994636500 Rev. B 2/2
Step 4. Using enclosed magnetic
screwdriver, loosen up the three (3)
screws securing the hard drive access
door. Gently remove the access door
at an angle. Step 5. Identify the hard drive to be
removed. Step 6. Using the enclosed
magnetic screwdriver, remove the
three (3) screws as indicated in the
picture.
CAUTION! Be careful not
to drop screws into the unit.
Step 7. With even force slide out the
HDD as shown.
Some force may be
required to unlock the HDD from the
connector.
Step 8. Gently pull out the original
HDD away from the computer as
shown. Step 9. Hold the new HDD by the
edges and slide it inside the
opening in an angle as shown.
Step 10. Align the HDD with the
connector and with even force push in
the new HDD. Reinstall the three (3)
previously removed screws.
Step 10. Reinstall the three (3)
screws previously removed.
Step 12. Reinstall the Battery Pack.
Reconnect the AC Adapter.
Power on your computer and
continue with the recovery process
by following the instructions
described on the back of the
recovery disk’s case.
Return the old HDD Bay to Sony
following the included shipping
instructions.
HDD [0]