Sony ILCE-5000 - Manual (Page 179)

Interchangeable Lens Digital Camera
ILCE-5000
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. Press and hold
down the shutter button until the bracket recording is completed.
You can select an image that suits your intention, after recording.
1. MENU
→
(Camera Settings
) → [Drive Mode] → [Cont. Bracket]
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Cont. Bracket: 0.3EV 3 Image (default setting):
This setting shoots three images continuously with an exposure value shifted by plus or minus 0.3 EV.
Cont. Bracket: 0.7EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus 0.7 EV.
Cont. Bracket: 1.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus 1.0 EV.
Cont. Bracket: 2.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus 2.0 EV.
Cont. Bracket: 3.0EV 3 Image:
This setting shoots three images continuously with an exposure value shifted by plus or minus 3.0 EV.
Note
The last shot is shown on the Auto Review.
In [Manual Exposure], the exposure is shifted by adjusting the shutter speed.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the ISO value. If a
setting other than [ISO AUTO] is selected, the exposure is changed by adjusting the shutter speed.
When you adjust the exposure, the exposure is shifted based on the compensated value.
When the flash is used, the product performs flash bracket shooting, which shifts the amount of flash light even if
[Cont. Bracket] is selected. Press the shutter button for each image.
Notes on use
4-487-944-11(1)
Help Guide
How to Use
179