Sony KDE-37XS955 - Manual (Page 32)

30
Setup
VCR and Cable For best results, use this connection if:
s Your cable company does not require you to use a cable box.
To connect the VCR and cable
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Using the 75-ohm coaxial cable (not supplied), connect one of the
output jack of the splitter to the TV’s CABLE jack.
3
Using a coaxial cable, connect the splitter’s other output jack to the
VCR’s input jack.
4 Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s
A/V input jacks (VIDEO 1 or 3).
5 Run the Auto Program function, as described in “Setting Up the
Channel List” on page 53.
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you can use all the dual picture features.
Using S VIDEO jacks? See page 29.
CABLE
R-AUDIO -L VIDEO S VIDEO
VIDEO IN 1
3
(MONO)
Rear of TV
A/V cable
75-ohm
coaxial cable
VCR
Coaxial cable
Splitter
CATV
cable