Sony VGN-A140P - Manual (Page 34)

VAIO® Computer Quick Start
34
Connecting the Wireless Mouse
Before attempting to use the wireless mouse, you must enable communication
between the computer and the mouse.
To connect the wireless optical mouse
1 Turn the wireless mouse over.
2 Slide the power button on the wireless mouse to the ON position.
3 Turn on your computer.
4 Reach underneath the right side of the computer and press the CONNECT
button.
5 Press the CONNECT button on the wireless mouse within 30 seconds after
pressing the CONNECT button on the computer.
6 Place the optical mouse on an appropriate surface to enable tracking. The
wireless mouse must be within 12 inches of the computer.
Connecting the Mouse
✍
Confirm that the AA batteries (supplied) are properly inserted into the mouse before
your computer is turned on.
Press to connect
Switch to the
ON position