Sony VGN-T150 - Manual (Page 11)

Gently pull the protective tabs away from the computer to find the modem jack and network (Ethernet) port. Do not
remove the tabs.
Only connect 10BASE-T or 100BASE-TX cables to the Network (Ethernet) port. Do not connect any
other type of network cable or any telephone line to this port. Connecting cables other than those listed above may
result in an electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the
unit to a network, see
Network Connections or contact your network administrator.
Back
1 DC In 2 Battery connector
Bottom
1 Air vent 3 Battery release button
2 Port replicator connector
Page 11