Sony KDL-46V25L1 - Manual (Page 13)

Getting Started
13
Getting Started When Connecting to Optional Equipment
1
2
3
VIDEO 2
IN
S VIDEO
VIDEO
L (MONO)
R
AUDIO
RGB
8 6
7
AUDIO
PC IN IN
L
R
VIDEO
AUDIO
(MONO)
L
R
VIDEO IN
S VIDEO 1
Y
P B
P R
L
R
HD/DVD IN
(1080i/720p/480p/480i)
3 5 4
AUDIO
DIGITAL OUT
(OPTICAL)
AUDIO OUT
VHF/UHF
(VAR/FIX)
AUDIO
5 6 4
0
9
qs
qa
qd 8 7
Left side Rear
For service
use only
Item Description
1 VIDEO 2 IN
S VIDEO Connects to the S VIDEO output jack on your camcorder or other video equipment that has
S VIDEO. Provides better picture quality than composite video (2). (See Auto YC on page
33.)
2 VIDEO 2 IN
VIDEO/
L (MONO)-
R AUDIO Connect to the composite video and audio output jacks on your camcorder or other video
equipment such as video game equipment.
If you have mono equipment, connect its audio output jack to the TV’s L (MONO)
audio input jack.
3 Headphones
jack Connects to your headphones. If your headphones do not match the jack, use a suitable plug
adapter (not supplied).
While headphones are connected, the TV speakers turn off, and volume control
affects headphone volume only. Sound Setting options, on page 28, have no
effect while using headphones.
4 PC IN 8
(RGB/AUDIO) Connect to a personal computer’s video output connector using HD15-HD15 cable (analog
RGB, supplied). Can also be connected to other analog RGB devices.
See “PC Input Signal Reference Chart” on page 43 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter
(not supplied). If this is the case, connect the adapter to the computer before
connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of the PC
Settings on page 36.
(Continued)