Sony DCR-IP7BT - Manual (Page 21)

21
Basic Operation
1
Insert a videotape into the MICROMV device.
Note
When you use MovieShaker for the DV device, select the "Device" menu from the
Menu bar, and then click "MICROMV Device" to select it.
2
Click the Capture tab.
The Capture tab is highlighted, and the Monitor panel switches to the
Capture tray.
The Tool panel displays the Index tray where the information of the
images on the MICROMV device (e.g., Cassette Labels for videotapes,
date and time recorded, and recorded time) appears.
3
Click the "Scan" button.
The dialog (dialogue) box indicating scanning progress appears.
When scanning is finished, the completion message is displayed.
4
Click "OK."
The dialog (dialogue) box closes. The thumbnail for the images are
imported from the MICROMV device and displayed on the Index tray.
"Scan" button
"Batch Capture" button
Menu bar Capture tab Clip tray
Continued