Sony DR-BT100CX - Manual (Page 26)

DR-BT100CX_4-130-037-51(1)
6
US
Specifications
General
Communication System
Bluetooth Specification version 2.1 + EDR
(Enhanced Data Rate)
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft)* 1
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Compatible Bluetooth Profiles*

A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Supported Codecs*

SBC* 4 , MP3
Supported content protection method
SCMS-T
Transmission range (ADP)
20 - 20,000 Hz (Sampling frequency
44.1 kHz)
Supplied accessories
USB () cable (1)
Earbuds (S×2, M×2, L×2)
Operating instructions (this book) (1)
Recommended accessories
Spare Earbuds: EP-EX10A (not supplied)* 5
USB charging AC power adaptor: AC-
U50AD (not supplied)* 5
* 1 The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
* 2 Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
* 3 Codec: Audio signal compression and
conversion format
* 4 Subband Codec
* 5 The optional accessories are not provided
in some areas.
Headset
Power source
DC 3.7 V: Built-in lithium-ion rechargeable
battery
Dimension (w/h/d) (excluding projection
parts and controls)
Approx. 19.5 Ч 74.0 Ч 17.5 mm
( 25 /
32
Ч 3 Ч 23 /
32
in.)
Cord (from unit to earpiece)
Approx. 0.6 m (23 9 /
16
in.)
Mass
Approx. 26 g (0.9 oz)
(including headphones: 4g (0.1 oz))
Receiver
Type
Closed, dynamic
Driver unit
9 mm, dome type (CCAW voice coil)
Frequency response
6 – 23,000 Hz
Microphone
Type
Electret condenser
Direction characteristic
Omni directional
Effective frequency range
100 – 4,000 Hz
Operating temperature
0 °C to 45 °C (32 °F to 113 °F)