Sony VPCSB11FX - Manual (Page 3)

VPCSB Series Optical Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 989202618 Rev. B 3/4
ODD Assembly
Step 1. Take the new ODD and Bezel
provided in the CRU kit and prepare for
assembly.
NOTE: Identify tabs on the Bezel and
tab holes located on the ODD.
Step 2. Align the tabs on the Bezel
with the tab holes located on the
ODD. Carefully press the Bezel into
place.
NOTE: After installation, all brackets
should sit flush with the ODD. The
stamped letters
located on the
brackets should all be facing the same
direction.
Step 3. Position the new ODD (Label
side down) and identify the correct
Bracket with the corresponding ODD
side (as shown).
Take note of the different shapes for
each
Bracket and the proper
alignment of the screw holes.
Step 4. Using the ODD Screws, install
the Brackets onto the new ODD.
Old Hard Drive
DriveDrive