Sony DPF-D70 - Manual (Page 16)

16 GB
Operations in an initial state
When the photo frame is turned on without a
memory card connected, the initial display
below appears on the screen.
When the photo frame is not operated for 10
seconds, demo mode is displayed. If any other
button than the power button is pressed, the
screen returns to initial display.
First, press MENU during initial display, and
then set the date and time.
Setting the clock
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
1
Press MENU on the remote control.
The menu screen is displayed.
2
Press v/V to select [Various
settings] and then press to
display the Various settings screen.
3
Press v/V to select [Date/time
settings] and then press .
The Date/time settings screen is displayed.
4
Select the format of the date.
1 Press v/V to select [Date Display Order]
and then press .
2 Press v / V to select a format and then
press .
• Y/M/D
• M/D/Y
• D/M/Y
5
Adjust the date.
1 Press v/V to select [Date] and then
press .
2 Press v/V to select a value and then
press .
6
Adjust the time.
1 Press v/V to select [Time] and then
press .
2 Press v/V to select a value and then
press .