Sony DSC-T2 - Manual (Page 57)

57
Usi
n
g
the
sh
oo
ti
ng
fun
ctio
ns
Shooting menu For details on the operation 1 page 45
• When the Face Detect function is activated
– You cannot use the AF illuminator.
– You cannot use the Digital Zoom function.
• In (Soft Snap) mode, the default setting is [Continuous].
• In the (Smile Shutter) mode, the Face Detect function activates continuously.
• Up to 8 faces of your subjects can be detected. However, only up to 4 faces of your subjects can be
detected when you shoot images with (Soft Snap).
• When the camera detects more than one subject, the camera will judge which is the main subject and set
focus by priority.
• The frame for which the focus is set will turn green by pressing the shutter button halfway down. All the
subjects at equal distance to the focused one are also focused, even if the frames do not turn green.
• Face Detection may fail, depending on the conditions.
• When the shooting mode is a mode other than
(Auto Adjustment), (Smile Shutter) mode, and
(Soft Snap) mode, the Face Detect function is always off.
Selects the anti-blur mode.
• In Auto Adjustment mode, [SteadyShot] is set to (Shooting).
• For movies, you can set (Continuous) or (Off) only. The default setting is set to
(Continuous).
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Selects the settings for the shooting function. The items appearing in this menu are same ones
as those in
(Shooting Settings) in (Settings) on the HOME screen. See page 44.
SteadyShot: Selecting the anti-blur mode
(Shooting) Activates the anti-blur function when pressing the shutter
button halfway down.
(Continuous) Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
(Off) Does not use anti-blur mode.
Setup: Selecting the shooting settings