Sony KDL-46NX800 - Manual (Page 4)

−  −
Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)
✍
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on
the TV.
• When removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is
larger than the TV.
• To prevent damaging the surface of the TV, make sure to place a soft cloth on the work surface.
• When lifting or moving the TV, keep a soft cloth underneath to prevent damage.
• The number and position of the screws on the rear of the TV differs, depending on the model of TV; be
sure to read the operating instructions of your TV.
• Be sure to remove the joint when the Table-Top Stand is not attached to the TV. (KDL-55NX87/
55NX8/55NX80/6NX80/6NX77/0NX77/6NX75/0NX75/6NX7/0NX7/6NX70/
0NX70 only)
CAUTION
• If pressure or shock is applied to the surface of the TV, the TV may break or become damaged.
• Lay the TV face down on a stable and level surface with the Table-Top Stand hanging over the edge of
the surface. Having the TV face and the base of the Table-Top Stand on the same level surface will create
an unstable working condition and can damage the TV.
• When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands.
5 Connect the supplied AC power cord. (XBR-52LX905/52LX900/46LX900/
40LX900/KDL-52NX807/46NX807/52NX800/46NX800/46NX705/40NX705/
46NX700/40NX700 only)
✍
• Do not attach the bottom cover and terminal cover.
6
Place the Spacers. (XBR-LX90 */KDL-NX80* only)
 Place the four spacers (supplied).
 Remove the four screws, and be sure
to store them in a safe place, keeping
them away from children.
* In the actual model names, the “” indicates numbers and/or characters specific to each model.