Sony LF-X1 User Manual
Page 16
Pr
ep
arat
io
ns
P
rio
r to
A
c
c
ess
fr
om a
Re
mot
e
L
oca
tio
n
16
Step 5 Registering Your Computer with the Base Station
Pre-release version
2
Click [NetAV Settings], [NetAV Connection], and confirm the settings.
(1) Type the domain name or static IP address of the target base station.
(2) Type the port number of the target base station.
z
Tip
When connected to the base station, this screen cannot be displayed.
Re-registering Your Computer with the Base Station
Perform registration again if you delete the information for a computer registered
with the base station on the LF-X1 or LF-X5 or initialize the base station.
Re-registering is necessary only if the registered computer does not appear when
you select [Settings], [Base station], [NetAV Settings], and then open the
[Register Other Monitors] screen (
1 page 13) on the LF-X1 or LF-X5.
1
Perform the procedure described in “Step 4 Getting the Base Station Ready
to Register Your Computer” (
2
Verify that the information of the target base station is correct (
3
Click [Registration for Binding], and then configure all the settings.
(1)
(2)
(1)
(2)