Sony VGN-BX540W - Manual (Page 2)

VGN-BX Series Hard Disk Drive
Replacement Instructions
P/N 994636400 Rev. B 2/2
Step 4. Locate the HDD Bay.
Rotate the computer with the Hard
Disk Drive (HDD) Bay facing you as
shown in the picture.
Step 5. Remove the HDD Bay.
Using the enclosed magnetic
screwdriver, remove the one (1)
screw securing the hard disk drive
bay.
Step 6. Release the HDD Bay.
Slide out the HDD Bay as shown.
Some force may be required to
unlock the HDD Bay.
Step 7. Gently pull the original HDD
Bay away from the computer as
shown. Step 8. Install New HDD Bay.
Hold the new HDD Bay by the edges
and align it with the opening.
Step 9. With an even force slide in
the new HDD Bay.
Step 10. Reinstall the one (1) screw
previously removed.
Step 11. Reinstall the Battery Pack.
Reconnect the AC Adapter.
Power on your computer and
continue with the recovery process
by following the instructions
described on the back of the
recovery disk’s case.
Step 12. Return the old HDD Bay
to Sony following the included
shipping instructions.