Sony DCR-TRV460 - Manual (Page 79)

D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB06MENU.fm
master:Right
Usi
ng t
h
e Me
nu
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Using the Menu 79
A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
PB MODE
For DCR-TRV460:
b Note
• The setting returns to [AUTO] when you disconnect the power source from your camcorder
or slide the power switch.
USB-CAMERA
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming).
For details, refer to the “Computer Applications Guide.”
G OFF Select when not using the Digital convert function.
ON ( ) To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the “Computer Applications Guide.”
G AUTO Select to automatically detect the system (Hi8 /standard 8 mm
or Digital8 ) that was used to recorded on the tape, and play
back the tape. During switching of systems, the screen turns blue, and
the following displays appear on the screen. A hissing noise also
sometimes can be heard.
t / : During switching from Digital8 to Hi8 /
standard 8 mm .
/ t : During switching from Hi8 /standard 8 mm
to Digital8 .
/ Select to play back a tape that was recorded on other devices in the Hi8
/standard 8 mm system when your camcorder does not
automatically detect the recording system.
G OFF Select to deactivate the USB Streaming function.
USB STREAM Select to activate the USB Streaming function.
, continued