Sony DSC-P2 User Manual
Page 79
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\13TRB.FM]
masterpage:L1adv-Right-04
model name1[DSC-P2]
[3-075-509-11(1)]
79
T
rou
bl
esh
oot
in
g
Digital zoom does not
function.
• You cannot zoom while shooting a movie
(MPEG movie).
• [DIGITAL ZOOM] is set to [OFF] in the SET
UP setting.
• The LCD screen is OFF.
—
p Set it to [ON] (pages 50, 92).
p Turn it ON (page 26).
The image is too dark.
• You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
• [POWER SAVE] is set to [ON].
p Adjust the exposure (page 53).
p Adjust the brightness of the LCD screen (pages 50, 93).
p Set [POWER SAVE] to [OFF] (pages 50, 93).
The image is too bright.
• You are shooting under a spotlight in a dark
location, like stage lighting.
• The LCD screen is too bright.
p Adjust the exposure (page 53).
p Adjust the brightness of the LCD screen (pages 50, 93).
The image is
monochrome (black and
white).
• [PFX] (P. EFFECT) is set to [B&W].
p Cancel the B&W mode (page 60).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring.
p This is not a malfunction.
You cannot shoot images.
• No “Memory Stick” is inserted.
• The capacity of the “Memory Stick” is
insufficient.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
• You cannot shoot while the flash is charging.
• The mode dial is not set to
or SCN while
shooting a still image.
• The mode dial is not set to
when shooting a
movie.
p Insert a “Memory Stick” (page 17).
p Delete the images saved in the “Memory Stick,” or format it.
p Change the “Memory Stick.”
p Set it to the recording position (page 95).
—
p Set it to
p Set it to
(page 69).
Symptom
Cause
Solution
01cov.book Page 79 Wednesday, April 3, 2002 11:17 AM