Sony PFM-42V1S - Manual (Page 63)

7
(GB)
Location and Function of Parts and Controls
Location and Function
of Parts and Controls
Front / Rear / Bottom
Front
Bottom
Rear
1 1 (standby) switch / indicator section
For details on the 1 (standby) switch / indicator section,
see “1 (standby) Switch / Indicator Section” on page 8
(GB).
2 Control button section
For details on the control button section, see “Control
Button Section (Top)” on page 8 (GB).
3 Stand installation hooks
Use these hooks to install the stand (not supplied).
4 SPEAKER Socket
Connects the speakers (not supplied) to this socket to
output the audio matching the signal displayed on the
screen.
5 Connector panel
For details on the connector panel, see “Connector Panel”
on page 9 (GB).
6 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the STANDBY indicator lights up in red and the
display goes into the standby mode.
For more details on the power cord, see “Connecting the
AC Power Cord” on page 15 (GB).
ON
ST ANDBY
1
2 3
5 6
4
5 6
The shaded areas shown in the illustration above are all
ventilation holes.