Menu position menu – Sony SDM-HS95PS User Manual

Page 13

Advertising
background image

13

GB

x Adjust the picture’s sharpness manually

(Phase/Pitch)

You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).

1

Set the resolution to 1280

× 1024 on the computer.

2

Load the CD-ROM.

3

Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility]

t [Windows]/[Win Utility.exe].

For Macintosh
Click [Utility]

t [Mac]/[Mac Utility].

4

Press the MENU button.
The main menu appears on the screen.

5

Press the

m/M buttons to select

(SCREEN) and

press the OK button.
The SCREEN menu appears on the screen.

6

Press the

m/M buttons to select “PHASE” and press

the OK button.
The “PHASE” adjustment menu appears on the screen.

7

Press the

m/M buttons until the horizontal stripes

are at a minimum.
Adjust so that the horizontal stripes are at a minimum.

8

Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.

9

Press the

m/M buttons to select “PITCH” and press

the OK button.
The “PITCH” adjustment menu appears on the screen.

10 Press the

m/M buttons until the vertical stripes

disappear.
Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

x Adjust the picture’s position manually

(H CENTER /V CENTER)

If the picture is not in the center of the screen, adjust the picture’s
centering as follows.

1

Set the resolution to 1280

× 1024 on the computer.

2

Load the CD-ROM.

3

Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility]

t [Windows]/[Win Utility.exe].

For Macintosh
Click [Utility]

t [Mac]/[Mac Utility].

4

Press the MENU button.
The main menu appears on the screen.

5

Press the

m/M buttons to select

(SCREEN) and

press the OK button.
The SCREEN menu appears on the screen.

6

Press the

m/M buttons to select “H CENTER” or “V

CENTER” and press the OK button.
The “H CENTER” adjustment menu or “V CENTER”
adjustment menu appears on the screen.

7

Press the

m/M buttons to center the test pattern on

the screen.

8

Click [END] on the screen to turn off the test pattern.

MENU POSITION menu

You can change the menu position if it is blocking an image on
the screen.

1

Press the MENU button.
The main menu appears on the screen.

2

Press the

m/M buttons to select

(MENU

POSITION) and press the OK button.
The “MENU POSITION” menu appears on the screen.

3

Press the

m/M buttons to select the desired position

and press the OK button.
You can choose one of 9 positions where the menu will
appear.

E X I T

1 2 8 0

1 0 2 4

6 0 H z

x

/

M E N U P O S T O N

I

I

Advertising
This manual is related to the following products: