Sony DAV-C900 - Manual (Page 68)

68
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
Select “SPEAKER SETUP” in the setup
display. For details, see “Using the Setup
Display” (page 64).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR.
x SIZE
When you do not connect center or rear
speakers, or move the rear speakers, set the
parameters for FRONT, CENTER and
REAR accordingly (see below). Since the
subwoofer settings are fixed, you cannot
change the settings. The default settings are
underlined.
• FRONT
— A: The speakers are used with the
speaker stands.
— B: The speakers are used without the
speaker stands.
• CENTER
— YES: Normally select this.
— NONE: Select this if no center speaker
is used.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER:
YES
BEHIND(LOW)
YES
YES
REAR:
SUBWOOFER:
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 65).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
system selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, Dolby Digital, or
MPEG audio format by selecting “AUTO.”