Sony DSC-WX300 - Manual (Page 179)

Screen
names
Functions
(1) Input box
The characters you entered are displayed. If you input characters exceeding the set
number of characters,
is displayed on the screen.
(2)
Switch
character
types
Each time you press , character types are switched among alphabet letters,
numerals and symbols.
(3) Keyboard
Each time you press , the character that you enter will be displayed.
For example: If you want to enter “abd”
Select the key for “abc” and press
once to display “a” select “ ” to move
the cursor (5) and press select the key for “abc” and press twice to
display “b” select the key for “def” and press once to display “d”
(4) Fix Fixes the entry.
(5) Move
cursor
Moves the cursor in the input box to the right or left.
(6) Delete Deletes the character preceding the cursor.
(7) Switches the next character to a capital or small letter.
(8) Space Enters a space.
To cancel entering characters midway, select [Cancel].
Other setting items
Depending on the status or the setting method of your access point, you may want to set more items.
Screen names Functions
WPS PIN Displays the PIN code to enter into the connected device.
IP address setting Selects [Auto] or [Manual setting].
IP address If you are entering the IP address manually, enter the set address.
Subnet mask/Default
gateway
When you set [IP address setting] to [Manual setting], enter the IP address to
match your network environment.
Priority Connection Selects [On] or [Off] for [Priority Connection].
Notes
To give the registered access point priority, set [Priority Connection] to [On].
173