Sony DSC-WX300 User Manual

Page 212

Advertising
background image

The Smile Shutter is working.
[Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People].

Cannot select the Face Detection function.

You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode
is set to [Multi].

The flash does not work.

You cannot use the flash when:

Shooting in Background Defocus mode
Burst mode is selected.

[Details]

[Anti Motion Blur], [Night Scene], [Hand-held Twilight], [High Sensitivity] or [Fireworks] mode is
selected in Scene Selection.
Shooting in Sweep Panorama mode
Shooting in movie mode

Set the flash to [On] when the Scene Selection mode is set to [Landscape], [Gourmet], [Pet], [Beach]
or [Snow] mode.

[Details]

Fuzzy white circular spots appear in images shot using the flash.

Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a
malfunction.

[Details]

The close-up shoot function (Macro) does not work.

The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus
adjustment may take some time when shooting a close subject.

[Landscape], [Night Scene] or [Fireworks] mode is selected in the Scene Selection.

The date and time are not displayed on the screen.

While shooting, the date and time are not displayed. They are displayed only during playback.

The F value and shutter speed flash when you press and hold the shutter

button halfway down.

The exposure is incorrect. Correct the Exposure Compensation.

[Details]

The image colors are not correct.

Adjust the White Balance.

[Details]

Picture Effect is selected.

[Details]

Noise appears in the image when you view the screen in a dark place.

The camera is attempting to increase the visibility of the screen by temporarily brightening the image
under conditions of low illumination. There is no effect on the recorded image.

You can see a dark shadow on the image.

Depending on the brightness of the subject, you may see a dark shadow when you change the
aperture. This is not a malfunction.

206

Advertising