Sony DSC-T7 - Manual (Page 16)

16
2 Make sure to match the locking screw with
the screw groove on the camera, and then
turn the locking screw to secure the stand
to the camera.
C Locking screw
D Tripod screw hole
Attach the tripod here.
• See the operating instructions supplied with the
tripod for the method of attaching the tripod.
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to firmly
secure the stand to tripods having longer screws,
and may damage the stand.
• Be careful so that the tip of the tripod screw
does not scratch the stand.
• Attach the tripod so that the camera is stable. If
you shoot with the camera in an unstable
condition, the camera may fall, resulting in
damage or malfunction.
4
3