Sony DPF-HD800 - Manual (Page 54)

54 GB
Tabl
e of
C
o
n
tent
s
Let
’s
U
s
e
E
njo
y
ing
Mo
re
T
ro
u
b
les
hoo
ti
ng
In
dex
• When you initialize a “Memory Stick
Duo”, use the initialization function of
your digital camera. If you initialize it
with your computer, images may not be
displayed properly.
• When you perform initialization, all the
protected images are erased. Take care to
avoid accidental erasure of important
data.
• You cannot store or delete data if the
write-protect switch is set to LOCK.
• Do not attach any material other than the
supplied label in the labelling position.
When you attach the supplied label, be
sure to place it in the labelling position.
Be sure that an edge of label does not
protrude.
SD memory card
• Some commercially available card
adaptors have projected terminals on the
back. This type of adaptor may not work
properly with the photo frame.
• Data reading/recording that requires
copyright protection cannot be
performed.
• When using a card, be sure to check the
correct insertion direction of the card.
Incorrect insertion may cause damage to
the photo frame.
• When inserting a memory card, it will
only insert part of the way, so do not try
to force it, as this could damage the
memory card and/or photo frame.
• Do not remove a memory card or turn
off the photo frame while the photo
frame is reading or accessing data.
Otherwise, data may be rendered
unreadable or be erased.
• We recommend that you back up
important data.
• Data processed with the computer may
not be displayed with the photo frame.
• When you carry or store a card, put it in
the exclusive case.
• Do not touch the terminal of a card with
your hand or a metal object.
• Do not strike, bend, or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
– Locations beyond the required
operational conditions, including
places such as the hot interior of a car
parked in the sun and/or in summer,
outdoors exposed to direct sunlight, or
a place near a heater
– Humid locations or locations with
corrosive substances present
– Locations subject to static electricity
or electrical noise