ATEN CL-1208 - Manual (Page 40)

F4 ADM:
F4 is an Administrator only function. It allows the Administrator to
configure and control the overall operation of the OSD. To change a setting
Double Click it; or use the Up and Down Arrow Keys to move the highlight
bar to it then press [Enter].
After you select an item, a submenu with further choices appears. Double
Click the choice you want, or move the Highlight Bar to it then press
[Enter]. An icon appears before the selected choice so that you know which
one it is. The settings are explained in the following table:
Setting Function
SET
USERNAME
AND
PASSWORD This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select the Administrator field or one of the User fields,
a screen that allows you to key in your username and
password appears. The username and password may be up
to 15 characters long, and can consist of any combination of
letters and numbers (A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password,
use the backspace key to erase individual letters or numbers.
SET LOGOUT
TIMEOUT If there is no input from the console for the amount of time set
with this function, the Operator is automatically logged out. A login
is necessary before the console can be used again.
This enables other Operators to gain access to the computers
when the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number
from 1 - 180 minutes, then press [Enter]. If the number is 0 [zero],
this function is disabled. Default is 0 (disabled).
(Table continues on next page)
2005-04-26
CL-1208 / CL-1216 User Manual
32