ATEN CL-1208 - Manual (Page 53)

Skip Mode
This feature allows you to switch between computers in order to monitor
them manually. You can dwell on a particular port for as long or as little as
you like - as opposed to Auto Scanning, which automatically switches after a
fixed interval. To invoke Skip Mode, key in the following Hotkey
combination:
1. Invoke HKM (see p. 41).
2. Key in [Arrow]
M Where [Arrow] refers to one of the Arrow keys. After you press
[Arrow], you automatically exit HKM, and enter Skip Mode where
you can switch ports as follows:
← Skips from the current port to the first accessible port
previous to it. (See Scan/Skip Mode, p. 31, for information
regarding accessible ports.)
→ Skips from the current port to the next accessible port.
↑ Skips from the current port to the last accessible port of the
previous Station. If you are at a port on the First Station you
cycle backward to the last accessible port on the Last Station.
↓ Skips from the current port to the first accessible port of the
next Station. If you are at a port on the Last Station you
cycle forward to the first accessible port on the First station.
M Once you are in Skip Mode, you can keep on skipping by pressing the
Arrow keys. You don’t have to invoke HKM again.
M While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended - only Skip Mode compliant keystrokes can be input.
You must exit Skip Mode in order to regain normal control of the
console.
3. To exit Skip Mode, press [Esc] or [Spacebar].
2005-04-26
Hotkey Operation
45