Sony DCR-SR87 - Manual (Page 87)

87
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
“Memory Stick PRO Duo” media
Operations using the “Memory Stick PRO
Duo” media cannot be performed.
If you use “Memory Stick PRO Duo” media
formatted on a computer, format it again on
your camcorder (p. 62).
Images stored on the “Memory Stick PRO
Duo” media cannot be deleted.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
camcorder (p. 100).
Recording
Refer also to “Memory Stick PRO Duo”
media (p. 87).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the (Movie) or (Photo) lamp
(p. 28, 30).
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete
unnecessary images (p. 44).
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder (p. 94). Delete unnecessary images
(p. 44).
While [DROP SENSOR] is activated (p. 77),
you may not record images.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and












take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
The ACCESS/access lamp remains lit or
flashing even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the recording media.
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 94).
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 80).
The recording conditions are not suitable for
auto focus. Adjust the focus manually (p. 80).








