Sony FWD-32LX1R - Manual (Page 38)

38
(GB)
Controlling Power On/Off Automatically (Timer Function) / Setting the Security Lock
2
Select either “Every day”or “Day of Week” with
M/m and press ENTER.
When “Day of Week” is selected, you can set a
specific time for each day of a week.
When “Every day” is selected, the following
screen appears on the screen.
TIMER/CLOCK
Every Day
On Time
Every day: 00 : 00
Off Time
00 : 00
Set ENTER Exit MENU Select
0 : 00 0 : 00
3
To set the On Time, change to with M/m
and press ENTER.
TIMER/CLOCK
Every Day
On Time
Every day: 00 : 00
Off Time
00 : 00
Set ENTER Exit MENU Select
0 : 00 0 : 00
4
Press M/m to set the On Time and press ENTER.
The hour is set and the background of the minute
display turns to yellow.
5
Press M/m to set the minute and press ENTER.
6
Set the Off Time as you set the On Time.
7
Press ENTER.
“On/Off Timer” is set.
Notes
• The time is not preset in the factory setting, so “-- : --
” is displayed for the clock.
• The time set for “Every day” is also applied for “Day
of Week.”
If you set the time for “Day of Week,” the setting of
“Every day” is cancelled.
Setting the Security Lock
A Security Lock function is provided with the display
unit. Once the Security Lock is set, the user is
prompted to enter a password when the display unit is
turned on, and a picture will not be displayed unless
the right password is entered and you cannot use the
display unit.
Note
Please keep this in mind when you use this function.
We recommend writing down the password set for the
display unit and keeping it in a safe place for
reference. If you forget the password, consult with
qualified Sony personnel.
To activate the Security Lock
1
Press MENU and set “Security Lock” to “On” in
the INITIAL SETUP/INFORMATION menu.
2
Enter a password.
Enter a four digit password with MENU,
M/m,
ENTER.
(“ENTER, ENTER, ENTER, ENTER” is set as
the factory preset password. Press “ENTER” four
times when you use this function for the first
time.)
Enter password key.
Password required for power-on.
Use : Cancel : Other key MENU ENTER
A dialog box prompting you to enter a new
password appears on the screen.
(Enter a password here even when you intend to
continue using the current password.)
Enter the password in the dialog box.
Enter new password key.
Power-on cannot be performed without the password.
Use : Cancel : Other key MENU ENTER