Sets whether to use the upload function of an Eye-Fi card (commercially available),
when you use the Eye-Fi card with this camera.
[Eye-Fi] is displayed only when the Eye-Fi card is inserted in the camera.

1. MENU (Settings) (Main Settings) [Eye-Fi] desired mode

Uses the upload function.
The Eye-Fi mode display icon on the screen will change depending on
the communication mode of the Eye-Fi card.

: Eye-Fi card is in standby mode. There is no image to be sent.

: Eye-Fi card is in upload standby mode.

: Eye-Fi card is in connecting mode.

: Eye-Fi card is uploading images.

: An error has occurred.

Off Does not use the upload function.

Notes

Eye-Fi cards are only sold in certain countries/regions.
For more information on the Eye-Fi card, contact the manufacturer or seller of
Eye-Fi cards directly.
Eye-Fi cards are permitted only in the countries and regions in which they were
purchased. You may be held liable due to local restrictions.
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card
where wireless LAN is prohibited, such as while aboard an airplane. If the Eye-
Fi card is inserted, set [Eye-Fi] to [Off]. When the uploading function of the Eye-
Fi card is set to [Off],

is displayed on the screen.

Transferring image data using the Eye-Fi card

1. Set the wireless LAN access point settings or the transferring direction settings

of the Eye-Fi card.
For details, refer to the operating instructions supplied with the Eye-Fi card.

2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot

the images.
The recorded images are automatically transferred via wireless LAN to a
computer, etc.

Notes

123

Advertising

Popular Brands

Popular manuals