Messages, Cyber-shot user guide – Sony DSC-H300 User Manual
Page 161
Search
Confirming the operation
method
Precautions / About this
camera
Top page > Troubleshooting > Warning indicators and messages > Messages
Messages
If the following messages appear, follow the instructions.
The battery level is low. Insert new batteries or charged Nickel-Metal Hydride
batteries (sold separately). Depending on the conditions of use or the type of
battery, the indicator may flash even though there are still 5 minutes to 10
minutes of remaining battery time left.
System error. Turn on the device again.
Turn the power off and then on again.
Internal memory error
Turn the power off and then on again.
Reinsert the memory card.
The inserted memory card cannot be used in the camera.
The terminal section of the memory card is dirty.
The memory card is damaged.
Incompatible type of memory card.
The inserted memory card cannot be used in the camera.
Buffer overflow. Writing to the media was not completed in
time.
If you use a memory card that has been recorded and erased repeatedly, or that
was formatted on a different camera, the data writing speed may be too slow.
First back up any data on the card to a computer, and then reformat the card
before using it.
The writing speed of the memory card you are using is not sufficient for movie
recordings. Use one of the memory cards listed below.
“Memory Stick PRO Duo” (Mark2) media, “Memory Stick PRO-HG Duo” media,
“Memory Stick XC-HG Duo” media or “Memory Stick Micro” (Mark2) media
SD memory card, SDHC memory card, SDXC memory card, microSD memory
card, microSDHC memory card or microSDXC memory card (Class 4 or
156