Sony DSC-T2 - Manual (Page 12)

12
2 Inserting the battery pack
1 Open the battery/“Memory Stick Duo” cover.
2 Insert the battery pack.
3 Close the battery/“Memory Stick Duo” cover.
[ To check the remaining battery charge
Press POWER button to turn on and check the remaining battery charge on the LCD screen.
• If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after
the battery remaining indicator.
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 14).
Battery/“Memory Stick Duo”
cover
Align the v mark of the battery slot with the v
mark on the side of the battery pack. Press and
hold the battery eject lever and insert the
battery pack.
Battery eject
lever
Open
Close
Remaining
charge
indicator
Status Sufficient
power
remaining Battery
almost fully
charged Battery half
full Battery low,
recording/
playback
will stop
soon. Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)