Sony DCR-SR40 - Manual (Page 18)

18
5
Set the camcorder onto the
Handycam Station securely.
Be sure to set the camcorder to the end.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged.
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
To charge the battery pack using only
the AC Adaptor
Slide the POWER switch up to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
• When you remove the battery pack, make sure
that none of the respective lamps of the POWER
switch (p.21) is on.
DC IN jack
CHG lamp
Open the
jack cover
POWER
switch
Battery
pack
DC plug
Power cord
To the wall outlet
AC Adaptor
BATT (battery)
release lever