Sony DCR-SR40 - Manual (Page 36)

36
To record in mirror mode............ qs
Open the LCD screen qs 90 degrees to the
camcorder (1), then rotate it 180 degrees to
the lens side (2).
• A mirror-image of the subject appears on the LCD
screen, but the image will be normal when
recorded.
To use a tripod........................ qg
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm) to the tripod
receptacle qg using a tripod screw.
To attach the shoulder belt ......... 0
Attach the shoulder belt (optional) with your
camcorder to the hook for the shoulder belt.
To play back a series of
still images (Slide show) ........... 5
Touch on the still image playback
screen (p.33).
The slide show begins from the selected
image.
Touch
to stop the slide show. To restart,
touch again.
• You can touch to set continuous slide show
playback. The default setting is [ON] (continuous
playback).
• You cannot operate playback zoom during slide
show.
To use Playback zoom............ 16
You can magnify images from about 1.1 to 5
times the original size.
Magnification can be adjusted with the power
zoom lever 1 or the zoom buttons 6 on
the LCD frame.
1 Play back the image you want to magnify.
2 Magnify the image with T (Telephoto).
A frame appears on the LCD screen.
3 Touch the portion you want to display in
the center of the LCD screen.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
• You cannot change the zoom speed with the zoom
buttons 6 on the LCD frame.
Playback