Sony HT-DDW900 - Manual (Page 58)

58 US
E:\SEM_soowan(film)\J9050000_2662263112DDW900_US\2662263112\US05AMP_HT-
DDW900-U.fm masterpage: Left
HT-DDW900
2-662-263-11 (2)
Watching HDMI images
from other inputs
(HDMI ASSIGN)
You can reassign a HDMI input to another
input.
1
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press control button V/v
repeatedly to select “6-VIDEO”.
3
Press the control button or
control button
b to enter the
menu.
4
Press control button V/v
repeatedly to select “HDMI A.”.
5
Press the control button or
control button
b to enter the
parameter.
“HDMI” flashes on the display.
6
Press control button V/v
repeatedly to select the HDMI
input you want to reassign (for
example, DVD).
7
Press the control button or
control button
b to enter your
selection.
8
Press control button V/v
repeatedly to select the input
you want the HDMI input
selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select “DVD–VD1”.
9
Press the control button to
enter the setting.
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a HDMI image.
The sound will be output from the TV
speaker. For details, see “Hooking up
components with HDMI jacks” (page 24).
The input you can reassign to varies for
each HDMI input. For details, see
“Assignable inputs for HDMI input”
below.
To return to the previous display
Press control button B.
Assignable inputs for HDMI
input
Notes
• You cannot reassign more than one HDMI input to
the same input.
• You cannot use the HDMI input as the original
input when it has been reassigned to another input.
HDMI input Assignable
inputs Display
DVD VIDEO 1 DVD–VD1
VIDEO 3 DVD–VD3
DVD DVD–DVD
MD/TAPE DVD–MD
SA-CD/CD DVD–CD
VIDEO 2 VIDEO 1 VD2–VD1
VIDEO 2 VD2–VD2
VIDEO 3 VD2–VD3
MD/TAPE VD2–MD
SA-CD/CD VD2–CD
US01COV_HT-DDW900-U.book Page 58 Thursday, December 15, 2005 4:08 PM