Sony HMZ-T3W - Manual (Page 22)

22
For a Comfortable Fit
Have the weight of the head mounted unit
balanced between your forehead and the
back of your head
Wear the head mounted unit so that it
feels balanced between the forehead
supporter and bottom headband, and
after repositioning it to bring the
lenses in front of your eyes, make sure
it fits securely.
Be sure to leave a space between the
bridge of the head mounted unit
(between the lenses) and your face, so
that the unit does not touch your
nose.
Ensure a secure fit
If either headband is too loose or too
tight, adjust the strap length for a
better fit.
To adjust the straps on the right
To loosen, hold down the fastener
button on the headband adjuster as
you pull the right end of the strap out
a little.
To tighten, simply push the right end
of the strap in a little.
To adjust the straps on the left
To loosen, hold down the fastener
button on the bottom of the
headband adjuster as you pull the left
end of the strap out a little.
To tighten, hold down the fastener
button on the bottom of the
headband adjuster and push the left
end of the strap in a little.
• The circles on the headband adjusters are
the caps for the accessory fixing screw
holes for future use. They are not buttons
and are inoperative when pressed.
Bottom headband
Forehead
supporter
To loosen
To tighten
Note
To loosen
To tighten