Power supply  audio/video (in common) – Sony HMZ-T3W User Manual

Page 39

Advertising
background image

39

The “

” marks and the horizontal line do not intersect on the confirmation

screen that appears when the system is turned on.

1

Adjust the length and position of the headbands, referring to “For a
Comfortable Fit” and “2 Adjust and Wear” in the “Startup Guide.”

2

Adjust the lens span while checking the display. Refer to “3 Setup and View”
in the “Startup Guide.”

• If no “

” mark intersects with the horizontal line after performing actions 1 and 2,

check on “Confirming Screen Alignment” (page 25).

 Power Supply

 Audio/Video (in common)

Symptom

Cause/Action

The system does not turn
on

 Confirm that the AC adaptor is connected properly,

referring to the “Startup Guide.”

 Confirm that the battery is charged (page 15).
 Hold down the  (Power On/Standby) button on the

head mounted unit for at least one second.

The system does not go
off

 Hold down the  (Power On/Standby) button on the

head mounted unit for at least one second.

Symptom

Cause/Action

No audio or video, or
audio or video is distorted

 Refer to the “Startup Guide” and confirm that the AC

adaptor and HDMI cable are connected correctly.

 Make sure that equipment connected to the HDMI IN

jack on the processor unit is on.

 Make sure that equipment from which you wish to view

is selected correctly with the INPUT button on the
processor unit when the processor unit is used.

 Confirm that the input signal is supported with this

system. For available signals, see “Video input” and
“Audio input” of “Specifications” (page 48). If the input
signal is not supported with this system, check the video
output and/or audio output settings on the connected
equipment.

 Confirm that the HDMI cable is firmly plugged in. If video

quality does not improve, the HDMI cable may be
damaged. In that case, try a new cable.

 If equipment is connected to the processor unit via an

AV amplifier (receiver), try connecting the equipment
directly to the processor unit instead. For details, refer to
the instruction manual of the equipment used.

 Use either the supplied HDMI cable or a commercially

available HDMI cable identified as a High-Speed cable.

 Also check section  Video,  Audio, or  Wireless.

FAQ

Advertising
This manual is related to the following products: