Sony DCR-SR300C - Manual (Page 96)

96
The CHG (charge) lamp does not
light while the battery pack is being
charged.
• Turn the POWER switch to OFF (CHG)
(p. 13).
• Attach the battery pack to the camcorder
correctly (p. 13).
• Connect the power cord to the wall outlet
properly.
• The battery charge is completed (p. 13).
• Set the camcorder onto the Handycam
Station securely (p. 13).
The CHG (charge) lamp flashes while
the battery pack is being charged.
• Attach the battery pack to the camcorder
correctly (p. 13). If the problem persists,
disconnect the AC Adaptor from the wall
outlet and contact your Sony dealer. The
battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
• The temperature of the environment is too
high or too low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 13).
• The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
• The temperature of the environment is too
high or low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 13).
The buttons do not appear on the
touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your
camcorder (or DISPLAY on the Remote
Commander (except for DCR-SR42))
(p. 19).
The buttons on the touch panel do
not work correctly or do not work at
all.
• Adjust the touch panel
([CALIBRATION]) (p. 115).
Menu items are grayed out.
• You cannot select grayed items in the
current recording/playback situation.
• There are some functions you cannot
activate simultaneously (p. 102).
You cannot operate functions using
the “Memory Stick Duo.”
• If you use a “Memory Stick Duo”
formatted on a computer, format it again
on your camcorder (p. 50).
You cannot delete images stored on
or format the “Memory Stick Duo.”
• The maximum number of still images that
you can delete on the index screen at one
time is 100.
• You cannot delete still images that have
write-protection set by another device.
The data file name is not indicated
correctly or flashes.
• The file is damaged.
• The file format is not supported by your
camcorder (p. 111). Use the supported file
format.
LCD screen
“Memory Stick Duo”