Troubleshooting, Battery pack and power – Sony NEX-3NL User Manual

Page 71

Advertising
background image

GB

71

Ot
her

s

Troubleshooting

If you experience trouble with the camera, try the following solutions.

The battery pack cannot be installed.

• When you insert the battery pack, use the tip of the battery pack to push the

lock lever (page 13).

• You can use an NP-FW50 battery pack only. Make sure that the battery is

NP-FW50.

The remaining battery level indicator shows incorrect level or
power runs out quickly despite the indicator showing sufficient
battery level.

• This phenomenon occurs when you use the camera in an extremely hot or

cold location.

• The battery pack is discharged. Install a charged battery pack (page 13).
• The battery pack is dead. Replace the battery pack with a new one.

Cannot turn the camera on.

• Install the battery pack correctly (page 13).
• The battery pack is discharged. Install a charged battery pack (page 13).
• The battery pack is dead. Replace the battery pack with a new one.

1

Check the items on pages 71 to 75. Also refer to

α Handbook” (PDF).

2

Remove the battery pack, wait for about one minute, re-
insert the battery pack, and then turn on the power.

3

Reset the settings (page 57).

4

Consult your Sony dealer or local authorized Sony service
facility.

Battery pack and power

Advertising
This manual is related to the following products: