Sony KD-34XBR960N - Manual (Page 30)

29
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
View (monitor) what is being
recorded Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration above).
Set up the TV remote control
to operate the VCR(s) If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 51-52.
Activate the TV remote
control to operate the VCR(s) Open the outside cover, as shown on page 50. Then set the A/V slide switch
to the position you programmed for the VCR.
Control VCR functions with
the TV remote control See “Operating a VCR” on page 66.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 105.
34XBR.book Page 29 Thursday, May 20, 2004 7:09 AM