Sony MZ-NF520D - Manual (Page 31)

31
Selecting the play mode for
group play (Group Play Mode)
1
Do steps 1 to 2 of “Selecting the play
mode” (page 30).
After normal playback (page 22), the
following play modes appears after
normal play.
2
Select “RepON” or “RepOFF”.
For the remote control operation, see
page 26.
Adjusting treble or bass
(Digital Sound Preset)
Selecting the sound quality
1
Enter the menu and select “SOUND”
- “SOUND1” or “SOUND2”.
To cancel Digital Sound Preset
Select “OFF”.
Adjusting the sound quality
1
Enter the menu and select “SOUND”
- “SET”.
2
Press . or > repeatedly until
“SOUND1” or “SOUND2” appears
in the display, and then press ENTER/
NX.
The display shows the currently
“BASS” sound setting.
3
Press . or > repeatedly to
adjust the sound level.
4
Press ENTER/NX.
“BASS” is set and the display
changes to “TRE” (treble) setting
mode.
5
Press . or > repeatedly to
adjust the sound level, and then press
ENTER/NX to enter the selection.
“TRE” (treble) is set.
The sound settings are saved and the
playback display appears again.
To cancel the procedure
Press MENU.
To return the preceding
settings
Press x/CANCEL.
For the details and the remote control
operation, see page 23.
Display Play mode
, Normal
(Normal
Group Play)
All tracks in the groups
play back once (starting
with the first track in
group 1).
, Shuff
(In-Group
Shuffle)
Shuffle play starts with
the group that is
currently playing, and
continues with the
succeeding groups.
Shows “SOUND1” or
“SOUND2” is selected
The sound can be adjusted in 8 steps.
(–4, –3, ...±0, ...+2, +3)