Connecting the md walkman to your computer, 48 connecting the md walkman to your computer – Sony MZ-NF520D User Manual
Page 48
48
Connecting the MD Walkman to your computer
After the software installation is completed, connect the MD Walkman to your computer.
1
Insert a recordable disc into the MD Walkman.
2
Insert the new dry battery into the MD Walkman, and connect the MD
Walkman to the computer using the supplied dedicated USB cable.
3
Check the connections.
When the connections have been properly made, “PC
ppMD”* appears in the display
of the MD Walkman.
∗
Depending on the MD Walkman, “Net MD” may be displayed.
When using the MD Walkman connected to your computer, it is recommended that you use a new dry
cell battery. We do not assure the results should there be a mis-operation, transferring failure, or
destruction of audio data caused by insufficient battery power.
Note
MD Walkman
Dedicated USB cable
To the USB
connecting terminal
To the USB jack/ dedicated jack
Computer
Insert the new
dry battery