Sony HT-CT660 - Manual (Page 18)

18 US
1
Prepare screws (not supplied)
that are suitable for the holes on
the back of the Sound Bar.
2
Fasten the screws to the wall.
The screws should protrude 6 to
7 mm (approx. 1/4 inches).
3
Remove the center stand.
4
Hang the Sound Bar onto the
screws.
Align the holes on the back of the
Sound Bar to the screws, then
hang the Sound Bar onto the
2 screws.
Setting up the Wireless
System
The Sound Bar transmits sound from
the equipment to the subwoofer by
wireless communication.
1
Connect the AC power cord
(mains lead) of the Sound Bar to
a wall outlet (mains).
2
Connect the AC power cord
(mains lead) of the subwoofer
to a wall outlet (mains).
The
 indicator of the
subwoofer lights up in red.
If it does not light up, press the
 button of the subwoofer and
wait for the indicator to light up in
red.
3
Press the
 button of the
Sound Bar.
When the wireless connection is
made, the
 indicator of the
subwoofer turns green. If it does
not turn green, perform the
operations of “Linking the system
(LINK)” (page 30).
Hole on the back of the Sound Bar
4 mm
(3/16 inches)
More than 25 mm (1 inch)
5 mm
(7/32 inches)
9 mm
(3/8 inches)
680 mm
(26 3/4 inches)
6 to 7 mm
(approx.
1/4 inches)