Additional information, Precautions, System menu additional information – Sony HT-M5 User Manual

Page 52

Advertising
background image

52

US

You can customize the settings of the receiver.

x DIMMER

Lets you adjust the brightness of the display
panel.
• DIM ON

The brightness of the display is reduced and
the indicators lights off.

• DIM OFF

The brightness of the display and the
indicators remain unchanged.

x AUTO.STBY

Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
• STBY ON

Switches to standby mode after
approximately 30 minutes.

• STBY OFF

Does not switch to standby mode.

Notes

• This function does not work when TUNER input is

selected.

• If you use the Auto standby mode and the Sleep

Timer at the same time, the Sleep Timer has
priority.

x NAME IN

Lets you set the name of inputs. For details,
see “Naming inputs” (page 33).

Precautions

On safety

Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.

On power sources

• Before operating the receiver, check that the

operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.

• The unit is not disconnected from the AC

power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.

• If you are not going to use the receiver for a

long time, be sure to disconnect the receiver
from the wall outlet. To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.

• (USA model only)

One blade of the plug is wider than the other
for the purpose of safety and will fit into the
wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact
your dealer.

• The AC power cord (mains lead) must be

changed only at a qualified service shop.

On heat buildup

Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.

SYSTEM menu

Additional Information

Advertising