Using the software – Sony DSC-T110 User Manual
Page 132
Ta
ble
of
Op
e
MENU/Settin
In
132
GB
Using the software
1 Turn on your computer and insert the CD-ROM (supplied) into the CD-
ROM drive.
The installation menu screen appears.
• If it does not appear, double-click [Computer] (in Windows XP, [My Computer])
t
(SONYPMB).
• If the AutoPlay screen appears, select “Run Install.exe” and follow the instructions that appear on the
screen to proceed with the installation.
2 Click [Install].
The “Choose Setup Language” screen appears.
3 Select the desired language, then proceed to the following screen.
The “License Agreement” screen appears.
4 Carefully read the agreement, click the radio button (
t ) to accept
the terms of the agreement, and then click [Next].
5 Follow the instructions on the screen to complete the installation.
• Restarting of the computer may be required. When the restarting confirmation message appears,
restart the computer following the instructions on the screen.
• DirectX may be installed depending on the system environment of your computer.
• For the installation, connect the camera to the computer during the procedure (page 134).
6 Remove the CD-ROM after the installation is complete.
7 Start up the software.
• To start up “PMB,” click
(PMB) on the desktop.
For the detailed operation method, see the following PMB support page (English only):
or click
(PMB Help).
• To start up “PMB” from the Start menu, select [Start]
t [All Programs] t
(PMB).
• If “PMB” was installed on your computer and if you re-install “PMB” using the supplied CD-ROM,
you can start up all the applications from “PMB Launcher.” To start up “PMB Launcher,” double-
click
(PMB Launcher) on the desktop.
• Log on as Administrator.
• When “PMB” is started up for the first time, the confirmation message of the Information tool appears on
the screen. Select [Start].
• If “PMB” has been already installed on your computer and that “PMB” version number is lower than that
of the supplied CD-ROM, re-install “PMB” using the supplied CD-ROM.
• If the version number is higher than that of the supplied CD-ROM, you do not need to re-install “PMB”.
When you connect the camera and the computer via USB cable, the available “PMB” function is
activated.
• If “PMB” has already been installed on your computer and that “PMB” version number is lower than 5.0,
some functions may become invalid after you install “PMB” using the supplied CD-ROM. Also, you can
start up “PMB” or other various software from “PMB Launcher” installed at the same time. To start up
“PMB Launcher,” double-click
(PMB Launcher) on the desktop.
Installing “PMB (Picture Motion Browser)” and
“Music Transfer” (Windows)
Notes