Sony KDE-50XBR950 - Manual (Page 26)

24
Setup
3
Install the display unit using an optional stand or rack unit.
For details, refer to the operating instructions supplied with your stand or rack unit.
4
Connect the other end of display interface cable to the Media receiver unit’s
DISPLAY SIGNAL OUT jacks, and connect the AC power cord (supplied) to
the media receiver unit’s AC IN jack.
5
After making all connections, connect the AC power cords (supplied) to wall
outlets.
Be sure to use the supplied AC power cords.
When connecting optional components, do not connect the AC
power cords to wall outlets until you have completed making all
connections.
Do not tighten the screws too much. It may damage the screws.
Handle the display interface cable with care. If you pull the
cable by catching your feet on the cable, this unit may fall and
cause injury.
Do not use damaged cables, such as cables whose connectors
are deformed.
S VIDEO
VIDEO
Y
P B
P R
L
R
Y
P B
P R
L
AUDIO
R
AUDIO
L
R
L
R
AUDIO
~ AC IN DVI–HDTV R - AUDIO - L
DVI–HDTV IN
i.LINK
(TV/DV/MICROMV)
VIDEO IN 3 6
4
1 AUDIO OUT
(VAR/FIX)
CONTROL S
SUB WOOFER
OUT(VAR) HD/DVD IN
(1080i/720p/480p/480i)
OUT
IN
OPTICAL OUT
DISPLAY SIGNAL OUT
WHITE BLACK
CABLE
VHF/UHF 5
S400
Tighten the screw slowly until
the screw is stabilized.
Display interface
cable (supplied) AC power cord
(supplied)