To disconnect your camera from the computer, Cyber-shot user guide – Sony DSC-RX100 User Manual
Page 220
Search
Top page > Using with your computer > Importing images to a computer > To disconnect your camera
from the computer
To disconnect your camera from the computer
Perform the procedures from step 1 to 2 below before:
Disconnecting the cable.
Removing a memory card.
Turning off the camera.
1.
Click the disconnect icon (
) on the tasktray.
With Windows 7, click
first, then click
.
2.
Click [Safely remove USB Mass Storage Device].
Notes
Drag and drop the icon of the memory card or the drive icon to the “Trash” icon beforehand when
you use a Mac computer, and the camera is disconnected from the computer.
The disconnect icon may not appear when you use a Windows 7 computer. In this case, you can
disconnect the camera from the computer without following the above steps.
Copyright 2012 Sony Corporation
213
Search