Charging the battery pack, Cyber-shot user guide – Sony DSC-RX100 User Manual

Page 247

Advertising
background image

Cyber-shot User Guide

Print

Search

Before Use

Shooting

Viewing

Using MENU items (Shooting)

Using MENU items (Viewing)

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions/About this camera

Contents list

Top page > Precautions/About this camera > Precautions > Charging the battery pack

Charging the battery pack

The supplied AC Adaptor is dedicated to this camera. Do not connect with other electronic devices.
Doing so may cause a malfunction. Also, make sure to use a genuine Sony AC Adaptor.
If the Power/Charge lamp of the camera flashes during charging, remove the battery pack being
charged, and then insert the same battery pack into the camera securely again. If the Power/Charge
lamp flashes again, this may indicate a battery error or that a battery pack other than the specified
type has been inserted. Check that the battery pack is the specified type. If the battery pack is the
specified type, remove the battery pack, replace it with a new or different one and check that the
battery is charged correctly. If the battery is charged correctly, a battery error may have occurred.
If the Power/Charge lamp flashes even if the AC Adaptor is connected to the camera and the wall
outlet (wall socket), this indicates that charging has stopped temporarily and is on standby. Charging
stops and enters standby status automatically when the temperature is outside of the recommended
operating temperature. When the temperature returns to the appropriate range, charging resumes
and the Power/Charge lamp lights up again. We recommend charging the battery pack in an ambient
temperature of between 10°C to 30°C (50°F to 86°F).

Back to top

Copyright 2012 Sony Corporation

240

Search

Advertising