Sony DSC-TX9 User Manual

Page 165

Advertising
background image

Ta
ble
of

co
nte
n

ts

Op
e

rat

io

n

S

ear

ch

MENU/Settin

g

s

Se
ar

ch

In

de
x

165

GB

Anti-blur function does not work.

• The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down.

Recording takes a long time.

• When the shutter speed becomes slower than a certain speed, for example, when you shoot images in

dark locations, the camera automatically reduces the image noise. This function is called NR (noise
reduction) slow shutter and the shooting time takes longer.

The image is out of focus.

• The subject is too close. When shooting, make sure to position the lens farther away from the subject

than the following minimum shooting distances:

– In Intelligent Auto Adjustment, Superior Auto Adjustment and Easy Mode: Approximately 1 cm

(13/32 inches) (W)/ 50 cm (1 ft 7 3/4 inches) (T) from the lens.

– In other recording modes: Approximately 8 cm (3 1/4 inches) (W)/ 50 cm (1 ft 7 3/4 inches) (T)

from the lens. Or set to Close focus mode and shoot about 1 cm to 20 cm (13/32 inches to 7 7/8
inches) from the W side distance.

(Landscape) mode or (Twilight) mode or (Fireworks) mode is selected in the Scene Selection

when shooting still images.

Zoom does not work.

• You cannot use the zoom in the following situations:

– In Intelligent Sweep Panorama mode
– In 3D shooting mode
– In Underwater iSweep Panorama mode

• You cannot use the Smart zoom depending on the image size (page 114).
• You cannot use the Digital Zoom in the following situations:

– In Superior Auto Adjustment mode
– In Background Defocus mode
– In Movie Mode
– When

(Backlight Correction HDR) mode is selected in Scene Selection.

– When the Smile Shutter function is activated.

Cannot select the Face Detection function.

• You can select Face Detection only when the focus mode is set to [Multi AF] and the Metering Mode

is set to [Multi].

• You cannot select Face Detection when the Close focus mode is activated.

The flash does not work.

• You cannot use the flash in the following situations:

– In Background Defocus mode
– When shooting burst images
– When

(Anti Motion Blur) mode, (Twilight) mode,

(Hand-held Twilight) mode,

(High

Sensitivity) mode or (Fireworks) mode is selected in Scene Selection.

– In Intelligent Sweep Panorama mode
– In 3D shooting mode
– In Underwater iSweep Panorama mode
– In Movie Mode

• Set the flash to [On] (page 60) in Close focus mode or when the Scene Selection mode is set to

(Landscape), (Gourmet),

(Pet),

(Beach), (Snow),

(Underwater) or (Hi-Speed

Shutter).

Advertising