Sony KDL-32L504 - Manual (Page 8)

8
6 VIDEO IN 1/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
L (MONO)-
AUDIO-R This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y/Video for video and use audio L (mono) and R for audio signal. For
component connection, use Y, P
B
, P
R
for video signals and also connect the audio L
(mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
7 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
L-AUDIO-R Component video provides better picture quality than the S Video and composite
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
8 AUDIO OUT
(FIX) L/R Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
9 AC power cord Plug the cord into the nearest wall outlet.
0 CABLE/
ANTENNA RF input that connects to your Cable or VHF/UHF antenna.
Item Description
• An HDMI or Component video (YP
B
P
R
) connection is required to view 480i, 480p, 720p, 1080i
and 1080p video formats. 1080/24p is available only with HDMI connection. This TV displays all
picture format types in a resolution of 1,366 dots × 768 lines.