Sony DSC-W1 User Manual
Page 98
model name1[DSC-W1/W12]
[3-091-535-11(1)]
98
filename[Z:\#Camera#\DSCW1\3091535111DSCW1U2\14trb.fm]
masterpage:Left
Smart zoom does not
function.
• [Digital Zoom] is set to [Precision]or [Off] in the
SET UP settings.
• The
image size
is set to [5M] or [3:2].
• You are shooting in Multi Burst mode.
• This function cannot be used during shooting
movies.
p Set [Digital Zoom] to [Smart] (pages 27, 46 and 114).
p Set
image size
to other settings except [5M] and [3:2]
p The smart zoom cannot be used in Multi Burst mode
—
The image is too dark.
• You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
p Select the metering mode (page 56).
p Adjust the exposure (pages 53, 54 and 110).
p Adjust the brightness of the LCD backlight (page 115).
The image is too bright.
• You are shooting a spotlighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too bright.
p Adjust the exposure (pages 53, 54 and 110).
p Adjust the brightness of the LCD backlight (page 115).
The image is
monochrome (black and
white).
• [PFX] (P. Effect) is set to [B&W].
p Set it to the other modes than [B&W] (page 60).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring.
p This phenomenon is not a malfunction.
Noise appears in the
image when you view the
LCD screen in a dark
place.
• The camera is functioning to increase the
visibility of the LCD screen by temporarily
brightening the image under conditions of low
illumination.
p There is no effect on the recorded image.
Symptom
Cause
Solution